Renko is another kind of candles. The most popular are candlestick charts, but there are many others types of charts created in Japan. There is for example Kagi, Three Line Break or Renko chart. Lets focus on Renko.

How Renko chart is built?

Chart is constructed by placing a brick once price surpasses the top or bottom of the previous brick by a predefined amount. Renko chart is time and volume independent – if there is no condition to draw another brick then chart may stay the same for days (until condition to draw another brick is created). White brick means the move is up, black the move is down. With Renko it is easier to spot trends and avoid trading when market is flat.

10.1. Renko bricks

10.1. Renko bricks

Renko software

Problem is that not every trading software has it build in. If you are using Metastock, you have it build in. If you trade Forex and you are using MetaTrader4, that is another story. I tried some Renko plugins for MT4 and did not found any good one.

Thankfully, there is a solution for Forex traders. Its online charting software http://www.tradingview.com. It is not free. If you want to use intraday Renko, there is a monthly subscription of 15$. I think it is a good price, because you get a whole charting software with Renko included.



Problem with box size

The main problem with Renko is that you have to set box size. You can do that with ATR or set box size manually.
ATR is ok on stock market, but on Forex pairs I prefer to set box size manually. Problem is, there is no golden rule to set correct box size.
With very small box size you will see several boxes appear at once. This makes trading very hard and you can easily get confused. For example, you set box size to 3 pips. The trend is down, you see leg of red boxes. Suddenly price hit reversal and moves 30 pips up and you get 10 green boxes at once. For most traders, this settings are too sensitive.

With bigger box size, let’s say 15 pips, you will see only two boxes and you can see better market picture. It is hard to show you on screens, but you will know that when you see it on live chart.

The safer way for new traders is to use larger box size or boxsize based on ATR. Thanks to that you will not overtrade and you will catch bigger trends.

So how to set proper box size?

Decide if you are trading short term or long term (1 day or longer). It is up to you. I prefer bigger box sizes because with them I can catch bigger moves. I knwo that there is a group of traders, who use Renko even for scalping. You have to decide what is best for you.

I will show you some example sizes which I use in TradingView. Remember, it is not like there is only one correct box size. You may use different size.

First, where to change box size. You click Format icon:

forex-trading-strategy-example-10-1-1-renko

And you can set box size to be based on ATR or traditional (manual) method:

forex-trading-strategy-example-10-1-2-renko

ATR set often very large box size. When I write this, based on ATR 14 I have box sizes such as:

GBPJPY 33 pips
EURJPY 24 pips
EURUSD 18 pips

As I wrote before, my favorite method is traditional style.When you select that method, you can set box size:

forex-trading-strategy-example-10-1-3-renko

Below are box sizes I use on popular FX pairs. Sometimes I change it, it is not written in the stone. If I see that market is moving slower than usual than I will lower box size. It comes with the practice.

Manual box size – yen pairs

First I open normal candlestick chart and observe price action in a history. You can easily see that GBPJPY is strong trending. It is not unusual for that pair to move more than 500 pips in few days.

That is why I set box size for GBPJPY around 20 pips so in tradingview format: 0.2

forex-trading-strategy-example-10-1-4-renko

Box size for EURJPY : 15 pips (0.15)
Box size for EURUSD : 10 pips (0.001)
Box size for GBPUSD : 25 pips (0.0025)

If you are not sure, which box size will be ok, start with size based on ATR. In a corner you will see what is the current box size based on ATR. In this example it is 29 pips:

forex-trading-strategy-example-10-1-5-renko

Later, if you decide that you want bigger or smaller box, you can switch to manual.

Renko as noise filter

I like Renko, because it filters the noise from the price. Reality is that every year we see more and more robots trading markets. Forex is great for them because it is 24 hour market with good liquidity. For us it is bad because it creates so much mess. That is the main reason why I do not trade 1m or 5m and switched to higher time frames.

How to trade with renko

There are many ways you can use it in your trading system. Same way you use normal candlesticks and put indicator on it, you can trade same way with renko.

In general, you can build your strategy around one of these methods:

  • trading breakouts with Renko
  • trading patterns
  • trading with other indicators
  • other

Trading renko – breakouts

As name states, you hunt for breakouts. Just like in normal trading with bars or candlesticks. The difference is that with Renko it is easier to spot breakouts.

10.2. Renko and breakouts

10.2. Renko and breakouts

Of course, you may see false breakouts. It is good to use that approach with other tools, to be sure that you are trading in the same direction as the main trend.
You will see more of that in practice in examples.

Trading renko – patterns

Again, normal hunting for patterns as you would hunt on candlestick or bar chart. So you look for double top, double bottom, head and shoulders etc.

Trading renko – indicators

My favorite way of trading with Renko is to combine it with indicators. If you already have a working system or set of good indicators, test them with Renko. Thanks to noise reduction you should get better signals.

Dangerous ranges

Even with the best box size you can see that market will move sideways. Flat markets are hard to trade because there is no clear trend and you can easily overtrade and take many losses.

Thankfully, with Renko you can easily mark top and bottoms. If you see a correction, it is a good practice to mark top and bottom with support and resistance line. That way you will remember that there is a risk of range move unless price break up or below. More of that in examples.

My trading strategy for Renko

I based my strategy on DEMA averages. You can experiment with another kind of averages, but I like Dema most. So, nothing fancy here. We have two groups.

Long term group (trend):
21 DEMA
33 DEMA

Short term group (signal):
5 DEMA
10 DEMA

On chart it looks like that:

10.3. Renko and moving averages

10.3. Renko and moving averages

How I use averages?

First I check if 21 is above 33 – then it is an uptrend. Otherwise, trend is down.

Signal lines are on the chart to give me an idea where current move is going. Sometimes I take cross, but not always. On many times, I close position based on RSI and open based on breakout. That is because averages are lagging. I mean, they are updated when new box is closed. Still, it is a good indicator of what is going on and I hope you will understand more when you see examples.

It is not all. I also use indicators. Mostly a pair of MACD and CCI or MACD and RSI with settings:

MACD – standard settings 12, 26, 9
RSI – 14
CCI – 21 or 33

10.4. Renko, averages and indicators (RSI, MACD)

10.4. Renko, averages and indicators (RSI, MACD)

Trade examples

GBPJPY, box size 0.2

Let’s start with an easy one. We have here a correction in a clear downtrend and we are looking to enter a short position. We do not look for a long position because 21 DEMA (orange) is below 33 DEMA (white). Also, MACD is below 0 line.
There are few signals which we can take to enter short. First we saw a cross of 5 and 10 DEMA. A good place to take short.
If we wanted better signal, then we have to wait to break below recent low (green support line).
In the same time there was a signal from RSI.

10.5. Short position based on breakout and confirmation from indicators

10.5. Short position based on breakout and confirmation from indicators

Same trade, the trend is strong. Eventually, there is a green box and the best exit position, in this case, is after the first box. We have two signals to do so.

1) cross of 5 and 10 DEMAs
2) green box is above 21 (orange) trend line (before it was below that trend line)

We could also wait, but later there was another signal to close, when thord green box closed above 33 DEMA.

10.6. Signals to close a trade

10.6. Signals to close a trade

Close based on a trend line

On many times, I do not wait for a cross of 5 and 10 but I watch the position of box against trend lines. You have to observe situation to decide which one will be more important.

In the example above we saw that boxes were always below 21 DEMA, so it was logical to close when there was green box above that line:

10.7. Position closed based on a trendline

10.7. Position closed based on a trendline

In other conditions, you may see a situation when 31 DEMA will be more important. Consider an example below:

10.8. Position close after green boc above 33 DEMA

10.8. Position close after green boc above 33 DEMA

Clearly 33 DEMA is a resistance here, 21 is not respected. That’s why we see green box above 33 DEMA, it is time to close short.

Corrections and number of boxes

If you trade long enough with Renko, you will notice that in strong trends you will have correction of 1, 2 or 3 boxes (or other numbers, depends on box size). If you think that trend is strong (because of some news or break below or above important level) then it is ok to include in your trading plan that you keep position open during corrections. Like in GBP/JPY, you will see many 1,2,3 box corrections:

10.9. Correction example

10.9. Correction example

or

10.10. Correction example

10.10. Correction example

If my play on trade is to hold as long as possible then I will keep trade open.
In my case, I do that only for smaller corrections. When I see more signals to close like stronger correction (with more than 3 boxes) I exit:

10.11. Stronger correction, box below 33 DEMA – time to exit

10.11. Stronger correction, box below 33 DEMA – time to exit

It is up to you. If you want to play safe, then you can always exit on cross/other signal and reenter trade.

Divergence from RSI

Divergence – when price makes new high but indicator does not confirm that, work pretty nice with Renko. Thanks to the filtered price action, you can see clearly where divergence takes place.
It is not that clear on MACD, but when you check RSI, you see it right away:

10.12. Divergence on RSI

10.12. Divergence on RSI

Another example:

10.13. Divergence on RSI

10.13. Divergence on RSI

And example from EURUSD:

10.14. Divergence on RSI and MACD

10.14. Divergence on RSI and MACD

It is very powerfull signal and it is much easier to spot than on normal candlestick chart.

EURJPY, box size 20

Sometimes after strong move you will see longer correction which may give you many mixed signals. Like on the chart below. You can see that for a moment 21 was above 33 DEMA, we saw signals to go log and short:

10.15. Mixed signals, part 1

10.15. Mixed signals, part 1

That is why during a correction it is smart to mark low and high like I did with green horizontal lines:

10.16. Mixed signals, part 2. We added horizontal lines

10.16. Mixed signals, part 2. We added horizontal lines

Notice that we had few signs that going up is not a good choice:

– it was a range move
– MACD was bellow 0 line all the time
– RSI was below 50 line

Finally, there was a break below lower support and a good entry point for short position.

AUDNZD, box size 16

It is important, not only with Renko but overall, to be disciplined about money and position management. You will not catch a strong 200 pips move with every signal. It is normal in trading that sometimes signal will be false and market will move against you.

It is important to close position when market is going against you.

This AUDNZD chart is a good example. Trend is down. Trade #1 was nice and easy. First we saw a cross of 5 and 10 and it was a good place to go short. Later, there was another cross with 5 above 10. Time to close and take profit.

Trade #2 looked good at first. We could reenter short position at cross of 5 and 10 or on break below recent low. As you can see, this was a false break and price started to move up. First we saw a cross of 5 and 10 and green box above trend lines. This was first place where we could close position. Second one was later, when price broke above resistance marked with red line (based on recent lower high)

10.17. AUDNZD two trades

10.17. AUDNZD two trades

You can see that later there was a strong move up. It was a good idea to close this position quick, with a small loss.

I closed position here above that red line. I simply thought that there will be some return for a moment and continuation down. It is a hard part – to decide when to close trade when something goes wrong.

You may and you will see many similar situations when everything is going well and suddenly price turns around. There is no 100% sure trading system. Money management is more than 50% of success.

AUD/NZD, box size 16

Let’s continue with the same pair and correction in an uptrend. You spot a correction, later price has found support and started to move up again. You could enter long right after break above red resistance line or on a cross of 5 and 10. But it is not over…

10.18. AUDNZD trade base on cross, part 1

10.18. AUDNZD trade base on cross, part 1

Price did not manage to break above recent high and 5 closed below 10. It does not look good. Question is, should you close long position or wait?

10.18. AUDNZD, part 2

10.18. AUDNZD, part 2

Take a look again. Remember the range (red lines) from first chart? If price has found support there, it is best to place stop loss below that range. In that case, you should wait it out, knowing that you have a stop loss in place.

Also, MACD and RSI are still positive.

10.18. AUDNZD, part 3

10.18. AUDNZD, part 3

In this case, correction ended here and price went up:

10.18. AUDNZD, part 4

10.18. AUDNZD, part 4

I should add, that if not that range, I would close it at first place, after that 5 and 10 cross.
This is a very good example because it shows you that if you see lows or ranges or other important support/resistance areas, you should use it.

Bund, 18 points box size

One thing about crosses. As I wrote before, I do not always use them as the main signal to enter a trade. There are cases when trend will be so strong and correction so shallow that cross of 5 and 10 will lag. Like in this example. What to do with that? Use different set of averages or trade simply based on breakouts.

10.19. Long opportunities during a strong trend and stop loss levels

10.19. Long opportunities during a strong trend and stop loss levels

Where did possible entry #1 come from? Take a closer look. It is a second green box.
Possible entry #2 was more sure signal to enter.

And when to exit? Take a look at RSI. For all the time of move up, it was holding above that blue support line. When it broke below it, it was clear that trend is not that strong anymore.

Setup your chart like a pro

Download my free guide & learn which trading tools are best.

Trade better and make more money.